LoveDodge

install aries 4 inch round nerf bars 2015 ram 1500 aaal235041 – etrail From 13475 Van Hornesville NY

Category: DODGE Ram 28 0

Latest Dodge RAM – install aries 4 inch round nerf bars 2015 ram 1500 aaal235041 – etrail – 13475 Van Hornesville NY Nov 2018.

Click for more info and reviews of this Aries Automotive Nerf Bars – Running Boards:

Check out some similar Nerf Bars – Running Boards options:

Search for other popular Ram 1500 parts and accessories:

Don’t forget to subscribe!

Full transcript:
Speaker 1: Today on our 2015 Ram 1500 we’re going to be test fitting the four inch Aries Nerf Bars, Part Number AAAL235041.These nice round bars will help you get in easily, and quickly. The extra wide, non-slick step pads will help you get in when it’s wet, and in other snowy and icy conditions. Since your trucks a crew cab, you’ll get the same thing in the back for your friends and family.The pads feature a polypropylene construction, which will make it crack and UV resistant. Unlike other round bars, this one features a textured black finish giving it a rugged exterior. Unlike the glossy and chrome finishes this will hide scratches and chips. The bars feature welded end caps, which keeps out moisture to prevent rust and corrosion.

The four inch tubular bars have 23 and a half inch step pads that are four inches wide. The pads come pre-installed on the bars, the bars come in a quantity of two and all the hardware you need to install it without drilling is included.We’re gonna start with our front bracket on the driver’s side. So, we’ll need to get down underneath and begin the installation. We need to begin removing the tape covering the holes in these two locations. Then take your M8 bracket, slide on your plastic retainer and push it into the frame there in the front hole.

You’ll then take your M12 bracket and slide its plastic retainer on, and put it in the hole to the rear of the M8. Then grab the appropriate bracket for the driver’s front, it’ll be labeled on the bracket. Slide it over your bolts, slide on your M8 washer, M8 lock washer and hand tighten your M8 nut. You’ll do the same for the M12 bracket. Then you’ll take your M10 bolt, slide on your lock washer, your washer then line up the nut on your M12 bracket with the middle hole that’s between your M8 and M12, and thread in that bolt.

We’ll leave it loose for now, as we’re gonna need to make some adjustments later. So we’ll install the rear bracket.Now, here at the back panel on the driver’s side we’re gonna install our rear bracket. Here at the back panel you’ll see the tape above the two open holes. We need to remove that tape and grab your M12 bracket, slide on the plastic retainer, and put it into place. You’ll then slide your bracket into place.

Here we’ve got our M10 lock washer and washer. You’ll again need to line up the M10 nut on the bracket, and thread in your bolt. Then take your M12 washer, M12 lock washer and M12 nut and thread it on. Again, leave it hand tight as we’re gonna need to adjust the height after we get the bar into place.Now, we’ll take our drivers side bar, set it up to the brackets and start the bolts. Now take your black M8 bolt, lock washer and washer and thread into your nerf bar. Do the same on both holes, then you’ll repeat this same process on the rear bracket. Now, you’ll adjust your bracket to make it even and then tighten down the bolts using a 16 millimeter socket. You’ll then tighten down your upper bolt using an 18 millimeter socket. Now we’ll adjust the front and tighten it down. Now that it’s adjusted, tighten the back barge nut with your 18 millimeter socket. The lower bolt here with your 16 millimeter socket. Then your small front 13 millimeter bolt.You’ll now want to adjust the height of your bars. I did this by using my pinky between the bar and the pinch weld. So we’ll line it up on both sides, then snug your bolts down. Adjust for a pinky’s length again here in the back, and tighten your bolts down.That completes our test fit of the Aries Big Step Nerf Bars on our 2015 Ram 1500.

install aries 4 inch round nerf bars 2015 ram 1500 aaal235041 - etrail Dodge Ram Quad Cab Nerf Bars

Nov 2018 install aries 4 inch round nerf bars 2015 ram 1500 aaal235041 – etrail Area Near 13475 Van Hornesville NY.

Search Interesting Articles Related to Dodge Ram Box or even Dodge Ram Ac Compressor, Please Bookmark LoveDodge.com Community Website.

Related Articles

Leave a Reply