Update on the 2013 5.7 Hemi engine.! new Edelbrock gen 3 Hemi heads Aurora Illinois 2018

Update on the 2013 5.7 Hemi engine.! new Edelbrock gen 3 Hemi heads McAllen Texas 2018

Dodge Durango Aftermarket Parts

my other YouTube channel is
Wicked Dodge Toys

Please join us on Facebook the group is called
Wicked Dodge Toys

5/2/2018

I am unveiling my new parts for my 2013 5.7 Hemi engine my new Edelbrock gen 3 Hemi heads for 5.7L & it can work on a 6.4L Hemi engine & More..!

Edelbrock Performer RPM Chrysler Gen III HEMI Cylinder Heads 61159

Brand:Edelbrock
Manufacturer’s Part Number:61159
Part Type:Cylinder Heads
Product Line:Edelbrock Performer RPM Chrysler Gen III HEMI Cylinder Heads
Summit Racing Part Number:EDL-61159

UPC:085347611591
Cylinder Head Style:Assembled
Cylinder Head Material:Aluminum
Intake Port Shape:Square
Intake Valve Diameter (in):2.165 in.
Cylinder Head Finish:Natural
Combustion Chamber Volume (cc):67
CNC-Machined Combustion Chamber:Yes
Intake Runner Volume (cc):202cc
Exhaust Runner Volume (cc):75cc
CNC-Machined Intake Runner:Yes
CNC-Machined Exhaust Runner:No
Combustion Chamber Style:Hemi
Intake Port Location:Standard
Exhaust Port Shape:D-port
Exhaust Port Location:Standard
Intake Valves Included:Yes
Exhaust Valves Included:Yes
Exhaust Valve Diameter (in):1.650 in.
Valve Springs Included:Yes
Maximum Valve Lift (in):0.630 in.
Outside Diameter of Outer Spring (in):1.066 in./1.300 in.
Damper Spring Included:No
Number of Springs Per Valve:Single
Retainers Included:Yes
Retainer Material:Steel
Locks Included:Yes
Lock Style:7 degree
Valve Stem Seals Included:Yes
Valve Stem Seal Style:Positive stop
Rocker Arm Studs Included:No
Rocker Arms Included:No
Rocker Arm Nuts Included:No
Guideplates Included:No
Valve Cover Mounting Style:Perimeter bolt
Accessory Bolt Holes Drilled:Yes
Intake Valve Angle:18.8
Exhaust Valve Angle:16.8
Valve Guides Included:Yes
Valve Guide Material:Manganese bronze
Valve Seats Machined:Yes
Valve Seat Machine Style:3-angle
Valve Seat Material:Ductile iron
Steam Holes Drilled:No
Oiling Style:Through head
Machined for O-Ring:No
Heat Crossover:No
Quantity:Sold individually.
Notes:Can be used on either driver side or passenger side of the block.

From Hot Rod magazines
And from Edelbrock

SEMA is a hotbed for new parts and we’re already starting to see some big-ticket horsepower items drop for 2016. The first we noticed was Edelbrock’s Gen III hemi heads. Previously, Gen III hemi builders were limited to factory castings and only a few expensive, niche manufacturers. Edelbrock’s Performer RPM heads bring a much needed option to the table for an engine architecture in dire need of aftermarket love.

The heads are drilled with bolt patterns to fit 5.7 Eagle, 6.1 and 6.4 intakes and will bolt up to a Hellcat supercharger. Intake flow is a whopping 350cfm and the 2.165-inch intake valves will even clear the smaller bore of the 5.7. The heads have a .75-inch thick deck to keep them rigid under power, and in a recent dyno test, they were worth 25-horsepower over a stock head. Like other Performer RPM heads they have an as-cast port, CNC chamber, and CNC profiled intake and exhaust entries/exits. Complete heads ship with upgraded valvetrain hardware as well.

There’s room to grow,” said Rob Simons, who lead the engineering of the heads. “If you want to port these yourself. They have a little more meat than what the stock head offers.” “They also have a thicker deck, better cooling –– sort of your standard hot rod recipe.”

This being an RPM level head, it’s based on stock-style architecture, such that no valve angles have been changed or ports raised/lowered, but Simons teases that there will be more to come. Could we see a Victor tier of gen III hemi head? Only time will tell –– because Simons wouldn’t spill the beans.

As a much-deserved compliment to the new heads, Edelbrock also released a Victor EFI manifold. Cast from aluminum, the manifold is ported for increased airflow and won’t snap like a potato chip should boost be turned up or a backfire occur. There are even cast bosses for direct-port nitrous nozzles to live, should one be so inclined. The manifold is a direct fit onto 5.7 Eagle, 6.1 and 6.4 hemis and is already pre-drilled for the larger Hellcat throttle body.
Christmas came early for Hemi fans this year.

As the team at Electric motor Trend found when it included one to its long-term fleet, the Dodge Durango GT is a spacious, flexible SUV that’s likewise sportier compared to you might expect. That stated, with a 295-hp V-6 under the hood, it’s no place near as powerful as the Durango SRT 392 However with the brand-new Rallye Look Bundle, you can a minimum of offer the Durango GT an SRT-inspired look.

Announced today, the Rallye Look Bundle offers a more aggressive front end, a sportier hood, and LED foglamps. It could not be necessary, yet Dodge says the hood inside story and vents are actually useful. If you tow a lot, it possibly cannot hurt.

For comparison, the front end of a Dodge Durango SRT 392.
” Many of our customers enjoy the performance look of the Durango R/T and Durango SRT, yet more than happy with the prize-winning Pentastar V-6 engine’s 295 horse power and the superb fuel performance it delivers,” stated Steve Beahm, FCA’s North American head of passenger cars, in a release. “This brand-new Durango GT Rallye Look Bundle offers those three-row SUV customers the most effective of both globes.”

The Rallye package is offered to buy now for $1,495 and can be found in 7 different shades. Thinking About the Durango GT begins at $38,990 including destination, that brings the base price of a Rallye-equipped Durango to $40,485.

Update on the 2013 5.7 Hemi engine.! new Edelbrock gen 3 Hemi heads, Dodge Durango Aftermarket Parts Toledo Ohio.

Latest Dodge Durango Aftermarket Parts at Toledo Ohio, Popular Stories About Dodge Durango Suv 2011 or Dodge Durango Aftermarket Parts, Share LoveDodge.com Blog.