Dodge Caliber Oil Type From Odessa 79760 TX USA

Search About DODGE Caliber With Dodge Caliber Oil Type – How to Test and Replace an Oil Temperature Sensor P0196 / P0197 / P0198 From Odessa 79760 TX.

Dodge Caliber Oil Type How to test and replace an oil temperature sensor; P0196 – P0197 and P0198. This sensor detects oil engine temperature and sends that message to the ecm. On the end of the sensor is a thermistor. The resistance decreases as temperature increases. You can quickly test the sensor via digital multi-meter and a hair dryer.

P0196 – Incorrect voltage is sent to the ecm when comparing signals from other sensors, such as the coolant temperature sensor and intake air temperature sensor.
P0197 – Low voltage; less than .17v
P0198 – High Voltage; greater than 4.7v
An average reading at idle is 1.0 – 1.4v

This vehicle happens to be a 2010 Subaru Impreza non-turbo.

» Subscribe:
» Website:
» Music: Cielo by Huma-Huma

OTHER VIDEOS THAT MAY INTEREST YOU
» Choosing the best oil filter: WIX vs K&N vs Amsoil vs Royal Purple:

SOCIAL:
» Facebook:
» Instagram:

Tools Used:
Safety Glasses
3/8″ Ratchet
10mm socket
Flat head screwdriver
19mm wrench
Gasket maker sealant

Note:
This video is being performed by an experienced tech. Any attempt to repair automotive parts and/or systems carries risk of personal injury. Always adhere and follow safe practices when working on vehicles. Such as, use safety glasses, jack stands, no loose clothing, etc. No guarantee or warranty is implied. Use the information in this video at your own risk. If you don’t think you can perform the job then be smart and don’t.

Publication, reproduction or distribution of this film is strictly prohibited.

Carsntoys

How to Test and Replace an Oil Temperature Sensor P0196 / P0197 / P0198, Dodge Caliber Oil Type From, Odessa 79760 TX.

More About Dodge Caliber Oil Type From Odessa 79760 TX, Interesting Relevant Articles More About 2007 Dodge Caliber Door Panel Removal and Dodge Caliber Oil Type, Visit Again LoveDodge.com Website.