Dodge Caliber Key Replacement at Dallas 75254 TX USA

Category: DODGE Caliber 37 0

Explore About DODGE Caliber With Dodge Caliber Key Replacement – DIY: Dodge Key Fob Battery Replacement & Disassembly at Dallas 75254 TX.

[ad_1]

Dodge Caliber Key Replacement Video tutorial on how to replace the battery and complete disassembly of a Dodge key fob. The disassembly includes how to open the case, remove the battery, circuit board, and buttons. This key fob is found in the years of 2004 to 2011 and the models include Durango, Dakota, Magnum, Ram 1500, Ram 2500, Ram 3500, Charger, Nitro, Caliber, and Avenger. Part number 05175786AA. You cannot separate the metal key from the plastic case.

Website:
Facebook:
Google Plus:
Twitter:
Instagram:
Tumblr:
Pintrest:

Tools/Supplies Needed:
-lithium battery model number CR2032
-coin or standard/flat screwdriver

Procedure:
-work in an area where you don’t risk losing any small parts
-find a slot on the side of the case and use a coin or standard screwdriver to pry the case apart
-once apart, the battery will be exposed on the backside of the case
-the battery simply snaps into place and can be removed using your fingers
-the positive side of the battery faces the backside of the case
-a replacement battery is a lithium battery model number CR2032
-to remove the circuit board and button assembly, slowly pull the rubber push pad from the case, assisting by pushing the buttons on the opposite side
-then to remove the circuit board, unwrap the push pad from around the circuit board
-reassembly in reverse of disassembly

Programming Key Instructions:
1. Turn your key to the “Run” position, but do not start the engine. Shut the doors and wait for the warning beeps to stop.
2. Hold the “Unlock” button on the currently programmed remote for five seconds, and then press and hold the “Panic” button (while still holding “Unlock”) for one second.
3. Press and hold the “Lock” and “Unlock” button on the same remote for a few seconds, then release the buttons and press the “Unlock” button.
4. Press and hold the “Lock” and “Unlock” button on the new remote, then release the buttons and press the “Unlock” button. Repeat the procedure for up to four remotes within 30 seconds.

Thank you to all those who watch my videos and support my content. Don’t forget to subscribe to my channel for future tutorial videos and like my video if you found it helpful. New videos are always being uploaded every week!

© 4DIYers 2013
All Rights Reserved
No part of this video or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author.

Dodge Caliber Key Replacement, 2017 DODGE Caliber Dallas 75254 TX

DIY: Dodge Key Fob Battery Replacement & Disassembly, Dodge Caliber Key Replacement at, Dallas 75254 TX.

[ad_2]

Update About Dodge Caliber Key Replacement at Dallas 75254 TX, Trending Relevant Events More About 2009 Dodge Caliber Oil Reset and Dodge Caliber Key Replacement, Search on LoveDodge.com Only.

Related Articles

Leave a Reply

Add Comment