Dodge Caliber Ball Joint Near Geronimo 78115 TX USA

Read More About DODGE Caliber Local Dodge Caliber Ball Joint – 2014 Honda Odyssey – Replacing CV Axle shaft (Driver’s side) Near Geronimo 78115 TX.

Dodge Caliber Ball Joint
Please click the above link for more info and product links on my website.

Just a quick video showing how to replace the Driver’s side Axle Shaft on a 2014 Honda Odyssey. I made a video of the Passenger side as well:

Special thanks to Kristian for the use of his garage and for lending a hand.
Tools needed:
36mm socket and breaker bar
small flathead screwdriver
diagonal pliers or similar
pry bar
new cotter pin for tie rod end
17mm socket and/or wrench
19mm wrench for ball joint nut
Torque specs I found online say 181 ft. lbs for the axle nut, (do not use an impact gun)
The tie rod end nut says 40 ft. lbs.
The ball joint nut says 43 ft. lbs, and then, if necessary, you can turn it just enough to line up the holes with the special locking pin.
You will also need to top off the transmission based on the amount of fluid that drains out. Between both sides, we lost just over a quart of fluid and so that’s the amount we put back in the transmission.

**If you live in an area with a lot of rust, you will probably want to spray some penetrating oil or PB blaster on everything ahead of time…just not on your brake rotors or brake pads.

Thanks for watching!
Please subscribe!
-Dan the Fix it Man

2014 Honda Odyssey – Replacing CV Axle shaft (Driver’s side), Dodge Caliber Ball Joint Near, Geronimo 78115 TX.

Update About Dodge Caliber Ball Joint Near Geronimo 78115 TX, Popular Relevant Events More About Dodge Caliber Kit Radio and Dodge Caliber Ball Joint, Please Keep Visiting LoveDodge.com Facebook Page.