LoveDodge

review rhino rack roof rack 2018 dodge charger rrva126b 2 rrrlkva dk29 at 98006 Bellevue WA

Category: DODGE Charger 62 0

Latest Dodge Charger – review rhino rack roof rack 2018 dodge charger rrva126b 2 rrrlkva dk29 – 98006 Bellevue WA.

Click for more info and reviews of this Rhino Rack Roof Rack:

Check out some similar Roof Rack options:

Click for more info and reviews of this Rhino Rack Roof Rack:

Check out some similar Roof Rack options:

Click for more info and reviews of this Rhino Rack Roof Rack:

Check out some similar Roof Rack options:

Click for more info and reviews of this Rhino Rack Roof Rack:

Check out some similar Roof Rack options:

Search for other popular Dodge Charger parts and accessories:

Don’t forget to subscribe!

Full transcript:
Speaker 1: Today on our 2018 Dodge Charger we’ll be taking a look at and showing how to install the Rhino-Rack roof rack system. This is going to consist of the Rhino-Rack Vortex Aero crossbars, part number RRVA126B-2, the Rhino-Rack 2500 Series legs, part number RRRLKVA, and the fit kit for our roof rack system, part number DK298. Now keep in mind that our crossbars are also available in silver with part number RRVA126S-2.This roof rack system is a great solution for carrying your vehicle accessories on your roof, whether those are bike racks, ski and snowboard carriers, or cargo boxes. It’s going to free up space inside your vehicle and allow you to carry more passenger side as well as cargo.The aerodynamic shape of our bars as well as the leather strip on the inside is going to help to reduce wind noise and drag. If we remove our end cap you can see our weather strip, which can be removed, cut down, and replaced with channel-mounted accessories. On our end cap we have a plastic lock core right now.

We do have the option to place in an all metal lock core which will help to prevent theft and tampering of your roof rack system, as well as those channel-mounted accessories.The end cap for our leg kit has the option to lock as well. This is going to help to prevent theft and tampering of your entire roof rack system. If we remove that we can take a look at our fit kit. This is going to be custom cut to our vehicle to give us a nice secure fit. The pad as well as the clamp are going to have a rubber coating to prevent any scratches or abrasions from our fit kit to our roof.The Rhino-Rack roof rack system has a 165 pound weight capacity, though you do want to double check your vehicle’s owner’s manual to make sure your roof can withstand that much weight.

It’s also going to come with a limited lifetime warranty and be quick and easy to install. We’ll show you how to do that now.We’ve gone ahead and laid out everything that we need to install the second half of our rear bar on our table here. The only thing we’ve provided ourselves is a flat tape measure. Everything else is included with our kit. We’re first going to have our end caps.

These are going to be for our leg kit, which will lock those into place and help to prevent theft and tampering. Then we’ll have our leg kit here, which is where our fit kit will attach to. Our included key to tighten down our end caps for our crossbars. The key for the end caps for our leg kit. We’re going to have our fit kit, both the clamp as well as the pad.

Our end cap for our crossbar. Our included tool. Again, that flat tape measure that we provided ourselves.We’ll start off with our leg kit. We’re going to undo our bolt here at the front. We’ll take our clamp and place it over where we removed that bolt. Then we can tighten the bolt down into the nut. We don’t want to tighten this down too much. We just want to tighten it down enough so that it holds our clamp into place. Once that’s done, we can flip our leg kit over and remove the bottom portion. It just snaps off. Set that leg kit off to the side and we can take our pad.We’re going to make sure that the arrows on both pieces are facing the same way, so the pad as well as the bottom flip portion. We’re just going to squeeze those together until all the holes are sealed. Once everything’s secured together we can take the pad and we’re going to make sure that the arrows facing towards the clamps, or out. We’ll click that back into place and we can place this onto our crossbar. Once on, we can measure out the position using the flat tape measure. It’s going to be 18.9 centimeters.Now with our kit you will get these plastic inserts that have the measurements on them. In this case we’re not going to use it for the demonstration, but you can

review rhino rack roof rack 2018 dodge charger rrva126b 2 rrrlkva dk29 2019

Search Near Zip 98006 Bellevue WA, New Stories Relevant to Dodge Charger Se & Dodge Charger Cold Air Intake, Please Bookmark LoveDodge.com Community Website.

Related Articles

Leave a Reply